Quantum Data 801GX Instrukcja Obsługi Strona 30

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 29
3M
Multimedia Projector MP8670/8745/8755/8770 Disassembly/Reassembly
Copyright 2000, 3M IPC. All Rights Reserved. 2-4
4
3
5
1
2
6
Main Board
Driver Board
4a
4b
2-3-2. Remove Main PWB Board
To avoid electrical shocks, unplug projector
power cord before performing any maintenance to
electrical components.
To avoid burns to fingers, allow projector lamp
and internal projector components to cool off prior
to lamp removal or disassembly.
9. Remove six (6) cable wire connectors.
10. Remove five (5) cable wire connectors.
Note
Some of these wire connectors are on the underside of
the circuit board.
11. Remove one (1) ground wire screw.
12. Remove one (1) ribbon connector.
Note
Carefully, lift straight up on both ends of the connector bar
(4a) to release the ribbon cable (4b). Handle with care,
this type of connector is easily broken.
13. Remove four (4) screws securing board to projector.
14. Carefully lift main board upward to remove.
Note
The main board has a plug-in type connector that inserts
into the driver board below.
15. Reassemble in reverse order.
!
Caution
!
WARNING
Przeglądanie stron 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 59 60

Komentarze do niniejszej Instrukcji

Brak uwag